Technical Information |
|
| Substrate | · Min. 64mm steel / timber stud wall with a minimum of two layers of 13mm (or greater) FR plasterboard on each side, with or without insulation.
· Min. 116mm concrete wall/masonry wall/block wall |
| Service range | Up to DN100mm PVC-U pipes |
| Annular gap | 5 - 12mm |
| AGNI-Products | AGNI-Wrap 50, AGNI-Seal |
| Protection installation | Both sides of the wall |
Compliance Information |
|
| Standards | AS1530.4-2014, AS4072.1-2005 |
| FRR/FRL | -/120/120 |
| Reference | PF24081, PF24100 |
